Exploiting Exchange PowerShell After ProxyNotShell: Part 4 – No Argument Constructor – Piotr Bazydło

– [[{“value”:”

As you may know, I recently presented my Exchange-related talk during OffensiveCon 2024. This series of 4 blog posts is meant to supplement the talk and provide additional technical details.

In this final part, I ’am going to describe the PowerShell Remoting ConvertViaNoArgumentConstructor conversion mechanism, which I underestimated at the beginning of my research. It allowed me to find 3 more vulnerabilities, even after the Exchange PowerShell attack surface had been significantly hardened by switching to a strict allow list of types. The vulnerabilities I found were:

• CVE-2023-36050 – XXE (File Read)
• CVE-2023-36039 – NTLM Relaying
• CVE-2023-36035 – NTLM Relaying

At least at that time, Microsoft was taking seriously NTLM relaying vulnerabilities in Exchange, because it could lead to privilege escalation.

You can also watch the full talk here: “Half Measures and Full Compromise: Exploiting Microsoft Exchange PowerShell Remoting”. This blog post covers the part from 26:25 to 29:45, but it significantly extends it.

Introduction

In this final part of the Exchange PowerShell series, I’ll describe the ConvertViaNoArgumentConstructor conversion mechanism. Initially, I was not interested in it, as I was always able to find an applicable RCE chain using single-argument constructor conversion.

My approach changed when the new patch for my RCE chains landed. Finally, it was a good patch. The entire deserialization protection mechanism (type control) had been redesigned. The new mechanism:

• By default, works solely based on an allow list.
• The internal deserialization in MultiValuedProperty is subject to the same validation.
• Type parameters of generic classes (like class T in SomeClass<T>) are also subject to validation.

After this patch, we canno longer take advantage of deserializing types that are missing from a deny list, since an allow list is being used instead. Also, the MultiValuedProperty<T> bridge gadget does not provide too much value, as the generic type parameter <T> is also subject to the same validation.

For my last dance with Exchange PowerShell, I decided to focus once more on the list of allowed classes. I had a hard time finding anything interesting for single-argument constructor or Parse method-based conversions, though. I decided to have a look at different conversions again, and I realized that the one based on a no-argument constructor is much more powerful than I initially thought.

The ConvertViaNoArgumentConstructor

ConvertViaNoArgumentConstructor works similarly to the majority of setter-based serializers:

• It initializes the object with a no-argument constructor.
• It uses setters to set the values of the members.

In the serialized XML payload, member values are defined using the MS tag:

Figure 1 – Sample member definition

The MS tag contains one subelement for each member that we want to deserialize. In the sample XML in Figure 1, we are specifying that:

• We want to deserialize a single member called SomeMember. The N attribute specifies the member name.
• We are deserializing the member value from a string. This is indicated by the S tag.
• The value for the member is the string value.

We can see that the ConvertViaNoArgumentConstructor conversion routine needs to somehow deserialize values for those setter calls. This is where things get interesting.

Let’s start from the beginning. When we deserialize an object with ConvertViaNoArgumentConstructor, we eventually reach one of the System.Management.Automation.LanguagePrimitives. ConvertViaNoArgumentConstructor.Convert overloads:

At [1], our object is instantiated with the no-argument constructor.

At [2], one of the SetObjectProperties overloads is called.

At [1], the code verifies that psobject is not null. This object holds data from our serialized payload, thus it should be a valid object.

At [2], it iterates over properties defined in our payload. It extracts the name of each member to be deserialized together with its value, and adds it to the dictionary at [3].

Finally, we reach an another SetObjectPropertiesoverload at [4].

At [1], it iterates over properties (members) specified in our serialized payload.

At [2], information about a given member is retrieved, including the type of the member in string form.

At [3], it calls TypeResolver.TryResolveType method to resolve the string representation of the type into a Type object.

At [4], we reach the LanguagePrimitives.ConvertTomethod, where:

• The target type is set to the type of the member that we want to deserialize.
• Our controlled value is provided as a value, from which we are going to deserialize!

To summarize: We can deserialize an allowed type through a no-argument constructor. We can set members of this type, using setter calls. When setting a member, PowerShell Remoting will use its internal conversions in LanguagePrimitives.ConvertTo to convert the value we specify. This means that it will try to deserialize it with all available conversions, including:

• Parse based conversion.
• Single-argument constructor conversion.
• No-argument constructor conversion.
• And others.

The entire process can be summarized with the following scheme.

Figure 2 – Simplified algorithm for ConvertViaNoArgumentConstructor

This deserialization routine opens up two main exploitation vectors:

a)         Dangerous members of allowed types.

We can target types that:

o   are on the allow list (can be deserialized with PowerShell Remoting), and
o   have a no-argument constructor, and
o   have a public member of some dangerous type. By dangerous type, we mean that it leads to security impact when deserialized with PowerShell Remoting. It is not necessary for this type to be on the allow list.

It is also important to note that deserialization of a member will happen even if the member has no setter, or even if there is a setter but the setter is not public!

b)         Dangerous setters of allowed types

We can also target the setters themselves if the implemented setter leads to something dangerous. I’ll show one example of this later.

ConvertViaNoArgumentConstructor – Example

You can see that this conversion mechanism is extremely hazardous because it allows us to significantly extend the attack surface. This is because members of allowed types can be deserialized with PowerShell Remoting conversions, even when the member of is not of an allowed type. Let’s see how it works based on some simple examples.

Consider the following sample class, and suppose that it is on the list of types allowed to be deserialized with PowerShell Remoting.

Figure 3 – Sample allowed class

We can see that it contains a no-argument constructor. Moreover, it contains a member reader, which is of type XamlReader. We can deliver a serialized object of type someWhitelistedType, and we can deserialize the reader member from a string. The deserialization flow is presented in the next figure.

Figure 4 – Deserialization of sample someWhitelistedType class

As expected, this leads to RCE. This is because PowerShell Remoting will try to deserialize a member of type XamlReader. XamlReader has already been abused in ProxyNotShell and other exploit chains to achieve RCE through XAML deserialization.

You could also imagine building a chain of types and members, where we are nesting multiple no-argument conversions to ultimately reach a member with a dangerous type.

Figure 5 – Chaining multiple no-argument constructor conversions to reach dangerous member

Now that we know how this powerful conversion works, let’s have a look at how I was able to leverage it to abuse three allowed Exchange classes.

CVE-2023-36039 – NTLM Relaying with FederationTrust

The first class I abused was Microsoft.Exchange.Data.Directory.SystemConfiguration.FederationTrust, which was allowed in Exchange PowerShell Remoting. This class has an interesting public member, called OrgCertificate.

Figure 6 – OrgCertificate member of FederationTrust

It is of type X509Certificate2. This type is not allowed in Exchange PowerShell, but we can still deserialize it when it is the type of a member of an allowed class.

It turns out that this type implements a single-argument constructor, which accepts a path to the certificate file and tries to read it.

Figure 7 – X509Certificate2 constructor

We can reach this constructor through PowerShell Remoting single-argument constructor conversion and use it for NTLM relaying.

CVE-2023-36050 – XXE with TransportConfigContainer

Another class is Microsoft.Exchange.Data.Directory.SystemConfiguration.TransportConfigContainer. Here, I abused the second kind of exploitation vector: attacking the setter call itself.

This class defines a TransportSystemState member, which is of type string.

Figure 8 – TransportSystemState member

We obviously can’t achieve anything malicious during the deserialization of string. However, when setting the property, the setter calls RefreshTransportSystemState, and this leads to XXE. This is because our input to the setter eventually reaches the GetOverrides method.

Figure 9 – GetOverrides – XXE

Exchange runs on an older version of .NET Framework, where XmlDocument is not protected by default from XXE vulnerabilities (classic). As we control the XML string through deserialization, we can abuse this, for example to read local files.

CVE-2023-36035 – NTLM Relaying (Partial Bypass for CVE-2023-36756 RCE)

The last vulnerability is a partial bypass for CVE-2023-36756. This vulnerability was described in the second part of this series. A small recap:

• We were able to deliver a CAB file to the Exchange using a UNC path (a path to a public SMB share within the domain).
• Exchange used the Windows exctrac32 utility for CAB extraction, which is vulnerable to path traversal.
• We could upload a webshell and get code execution.

This vulnerability was patched by making three changes:

• ApprovedApplicationCollection is no longer allowed. This is the class that was used to reach the CAB extraction.
• extrac32 is no longer used for the extraction.
• A call to IsUNCPath was added, which should block the extraction of CAB files from an attacker’s share.

Let’s have a look at this IsUNCPath method:

Figure 10 – IsUNCPath method

It first uses Uri.TryCreate to try parsing the file path, and if that succeeds, it verifies if we have delivered a UNC path by calling Uri.IsUnc. If at least one of those conditions is not true, we would be able to bypass this check. Although the path traversal vulnerability is no longer present, meaning that this would no longer allow us to upload a web shell, nevertheless it at least could be used for NTLM relay.

It turns out that the bypass is very simple here. We can just use the \?UNCserver… syntax (if you don’t know it, please see this article by James Forshaw).

Uri.TryCreate(“\\?\UNC\win-attacker\poc”) -> null

The Uri class is not able to handle this syntax and it will return null! However, this path will be later used in the FileInfo constructor:

new FileInfo(“\\?\UNC\win-attacker\poc”) -> OK

Using this syntax, we can bypass the IsUNCPath check and potentially perform NTLM relaying.

We are still missing one piece, though. How can we reach the CAB extraction methods, if our ApprovedApplicationCollection type was removed from the list of allowed classes?

ConvertViaNoArgumentConstructor to the rescue! It turned out that Exchange allows deserializing the MobileMailboxPolicy class. This class has a member which is of type ApprovedApplicationCollection!

Figure 11 – MobileMailboxPolicy member of ApprovedApplicationCollection type

Even though Microsoft didn’t want us to deserialize ApprovedApplicationCollection anymore, we were still able to do just that through member deserialization. This shows the power of the no-argument constructor conversion.

Summary

In this blog post, I presented the ConvertViaNoArgumentConstructor conversion of PowerShell Remoting. It is a powerful deserialization mechanism, which significantly extends the attack surface for the entire PowerShell Remoting. It helped me to abuse 3 more allowed Exchange classes, to gain quite a good impact: NTLM Relaying (Privilege Escalation) and XXE (File Read + NTLM Relaying).

This will be the last post in the Exchange PowerShell Remoting series, and I hope you enjoyed it. In my upcoming blog posts, I’m planning to focus on some vulnerabilities that I have recently discovered in Microsoft SharePoint, so stay tuned.

Until my next post, you can follow me @chudypb and follow the team on Twitter, Mastodon, LinkedIn, or Bluesky for the latest in exploit techniques and security patches.

“}]]  – Read More  – Zero Day Initiative – Blog